Understand the parameters of the tube cap

Understand the parameters of the tube cap  

 Cap pipe fittings production co., Ltd. is mainly according to customer requirements to produce various specifications of the tube cap, our company can according to customer requirements and needs to produce a variety of standard tube cap, as well as design and processing, huang Ying each user order!  

 The material of tube cap is divided into carbon steel, alloy steel, stainless steel and so on  

 The type and standard of pipe cap are mainly made according to customer's requirements.  During the installation process mainly adopts the tube cap is direct welding in the welding process will be a seam, requirements for connection weld direction refers to allow radial and reversing, type cap may cancel requirements, joining together the distance should be requirements, for more than 3 RMB, and can not be less than 100 mm, but refrigeration equipment is difficult to meet the requirements, according to the practical experience,  Stress reduction length is greater than 3mm, not less than 100mm mainly for refrigeration equipment to meet such requirements, there are particularities.  

 After splicing, forming to reach the pipe cap, splicing welds should be 99% ray or ultrasonic detection, qualified level equipment shell.  Weld detection level after forming, such as shell same.  

 If more housing is required than is used, it is wasted.  And it is wrong to test before making for forming, which can not guarantee the quality after forming. That is to say, non-destructive testing means that the testing of finished products is only effective.  

 According to the above introduction of our company to the customer in the installation of pipe cap connecting pipe cap in the welding process and the use of ordering pipe cap to avoid waste of material and production process, as well as the detection process after production, we hope to help each customer