Protection scheme of pipe cap

Protection scheme of pipe cap  

The protection scheme of pipe cap is mainly in the process of pipeline installation after construction. The use Angle and protection of the pipe cap shall be considered for the construction of the pipe cap in the site.  Specific look at the construction steps to find a plan for protection.  Pipe cap in the process of engineering construction, no damage to the pipeline.  

 Protection and treatment procedures for pipe caps in the pipeline: if the pipe caps need protection in the installation pipeline, install them under the protection of construction and use.  

 Use familiar personnel to install pipe caps to avoid unprotected operation during construction.  

 The pipe cap shall be protected. The pipe cap for reinforcement shall be corrosion-resistant and shall not be exposed to the outside for a long time, so that the pipe cap shall be protected during the implementation of reinforcement.  The installation of the cap should be kept clean, free of debris, stones, etc.  To do a good job of groove drainage measures, according to the customer in the need to extend the installation of steel pipe drainage installation, pipe cap in the pipeline is only a pipe fitting, the role in the pipeline is to block the pipeline.  

 BS GB/T JB SH HG,GB/ T12459-2017,GB/T13401-2017,ASME B16.9,SH3408,  

 SH3409,HG/T21635,DL/T695,SY/T0510, DIN2617  

 The pipe cap is mainly used in petroleum, chemical industry, water treatment and other pipeline installation process.  

 The packaging method of tube cap is mainly according to customer's requirements: for example, wooden cases, cartons, pallets and so on.