The company provides customers with the protection

The company provides customers with the protection of the cap  

When the customer orders the pipe cap fittings of our company, our company will provide the customer with a protection scheme for the pipe cap fittings after signing a contract with the customer. After the customer sees the protection scheme for the pipe cap, the following protection needs to be done for the pipe cap after entering the site: it is raining in the site, and the distribution of sewage pipes is complicated.  In order to ensure the early construction of the project and ensure the quality of construction, as well as the perspective of safe construction, our company makes a good protection scheme for the pipe cap.  The protection of the pipe cap is as follows: the pipe money is not damaged in the process of engineering construction.  Collect pipeline data, field investigation, trench excavation, situation report, manual excavation, pipeline protection.  Use, quantity, direction, and use of pipe cap in construction area according to drawings provided by customer.  This is also the protection measure and basis of the specified cap fittings in the pipeline.  

Because the surveyors and technicians can jointly observe the actual situation on site.  We will send the drawing of the cap to our company, and we will choose the material and technology of the cap for you.  Our company produces pipe caps for customers to bring beneficial benefits and quality assurance.  And the simple operation of the staff in the installation process.  

After the tube cap is welded together with the cylinder body, it is necessary to clean the weld and heat affected area in time, clean the welding slag, pollutants and spatter, and pickling the surface;  Prevent any bump and scratch on the surface of the pipe cap;  Prevent direct contact with carbon steel, avoid iron pollution;  Do not store the oval head in the open air to prevent it from being caught in the rain;  Must not be forced to the tube cap welding, in the design of the structure, to prevent the stress is too large;  In the water pressure test, will use the water chloride ion, its content can not be too large, but also need to blow dry after the test;  When pickling tube caps, hydrochloric acid and other reducing acids should not be used.  The above is the company to provide you with the protection of the cap.