Cap manufacturer

• Cap manufacturer

The pipe cap products produced by the pipe cap manufacturers have a large number of inventory, reliable quality, timely delivery, long service life is the main price is low, we can provide samples according to the pipe cap products ordered by customers, our company sincerely for each customer service, welcome to visit our factory to order.  Our company 24 hours for each customer order pipe cap products service!  

The products of pipe cap manufacturers are mainly divided into: pipe cap, elbow, tee, size head, flange, elbow, steel pipe and so on.  The material of the above products is mainly divided into carbon steel, alloy steel, stainless steel and so on.  

The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.  Convex pipe cap includes: hemispherical pipe cap, oval pipe cap, disc pipe cap and dome pipe cap.  From the point of view of force, convex pipe cap is gradually bad from the hemispherical pipe cap, but from the point of view of manufacturing difficulty, gradually good manufacturing.  

Alloy pipe cap and stainless steel elbow use value is different, in the user's impression and satisfaction will be different, so in the use of pipe cap and stainless steel elbow should pay attention to its different performance and characteristics, according to different environment and scope of use.  

Caps are usually used at the ends of pipes, and caps are used at the upper and lower (vertical) parts or left and right ends (horizontal) of container equipment. Caps are usually of outer diameter size, such as 219,273,325, etc.  Pipe cap, also known as plug, cap, pipe cap, head, installed on the pipe end of the external thread to cover the pipe fitting.  Used to seal the pipe, the function is the same as the pipe plug, but the pipe cap can be directly screwed on the pipe, no other pipe fittings are required.  It is generally used for sampling port at the end of the pipe. After sampling is completed, it is necessary to screw the pipe cap. Secondly, in special circumstances, after screwing off the pipe cap, the wire mouth can be connected to the pipe, and temporary continuous feeding or pumping.  The tube cap is generally used in the case of low pressure, which is easy to disassemble and repair. In the case of high pressure, the tube cap is generally not needed.  The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.