Pipe cap manufacturers adopt advanced production t

Pipe cap manufacturers adopt advanced production technology  

Hebei pipe fitting manufacturer is a metal manufacturing manufacturer with many years of experience in the production of pipe cap manufacturing and sales.  In the production of pipe fitting technology is the domestic advanced production manufacturers.  

The head is used for the upper and lower vertical parts or the left and right ends of the container equipment, while the pipe cap is usually used for the end of the pipe. The pipe cap is usually of outer diameter size, such as 219.273.89.325.  Pipe cap is also called plug, pipe cover, cap, installed on the pipe end of the outer thread to cover the pipe fitting, used to close the pipe, the effect on the pipe plug shape, but the pipe cap can be directly rotated on the pipe, no other pipe fitting.  It is generally used for one end or the end of the pipe to use the pipe cap products produced by our company. The pipe cap is commonly used in the connection of pipe installation: direct welding, flange connection and so on.  

The pipe cap is generally used in the case of low pressure, in order to facilitate disassembly and maintenance.  In the case of high pressure, the cap is not generally used. The cap includes convex cap, conical shell, reduced diameter section, flat cover and shrinkage design.  

The cap and head shape is similar, the material is more stainless steel, the size of the cap is small, can be forged, the size of the head is relatively large, generally pressed with steel plate, convex pipe cap includes, hemispherical pipe cap, ball cap and butterfly pipe cap.  From the point of view of force, convex pipe cap is gradually bad from the hemispherical pipe cap, but from the point of view of manufacturing difficulty, gradually easy to manufacture.  

Generally speaking, the head is the inner diameter, which means that there is no requirement for the transition part of the inner diameter pipe cap. Generally, only the diameter and length can be found in the manual, and the straight side part is longer.  The pipe cap is just the plug of the pipe, and the head should be used instead of DN over 300, for example, the pressure should be checked for strength.  Pipe cap is used in water, beverage, food, nuclear power, machinery, petroleum, chemical, water treatment and other pipeline installation.  Packing method: wooden case, carton, pallet, etc.