High pressure tube caps and carbon steel tube caps

High pressure tube caps and carbon steel tube caps

The wall thickness of the high pressure pipe cap is mainly used in the installation process of the pipeline of the petroleum and chemical pipe cap. The pipe cap is also called the head. The head is mainly used in the end cap of the pressure vessel, which is a main pressure component of the pressure vessel and plays the role of sealing. Can be welded at both ends of the tube end, called the upper and lower bottom of the pressure vessel, and the head in the form of the tube is mainly called a seal. The cap and the head fittings serve the same purpose and are used for sealing.

High pressure tube cap making standard is generally used by stamping forming, for non-standard series of tube cap or large diameter tube cap products, generally using spinning forming.

High pressure tube caps generally use cold spinning. When the tube cap wall is thick or the material strength is high, it is difficult to use cold spinning. On the tube cap at the edge of the capacity limit of the spinning equipment, the use of cold spinning is simple, high production efficiency and long service life.

Carbon steel cap: the end cap on the pressure vessel, is one of the main pressure components of the pressure vessel.

Heat treatment of carbon steel tube caps: In order to effectively slow down and prevent the abnormal failure of pressure vessel head, the actual effect of main metal properties and removal of residual stress. In addition to strictly according to the specification of manufacturing, heat treatment work will undoubtedly play a pivotal role.

• 上一篇：Basic requirements for forming tube caps

• 下一篇：Where carbon steel caps are used