17761570019
AOCHENG
Product Center
产品类型：Seamless pipe
产品型号：1/2”-24”
产品厚度：sch40/80 STD XS
扫一扫加微信详询
Alloy pipe fitting is a kind of pipe fitting. It is made of alloy steel, so it is called alloy pipe fitting.The products mainly include alloy tee, alloy tee, alloy reducer (size head), alloy cap (cap) socket, tube hoop, flange, flexible joint (by ren), flanging and so on.
Alloy elbows are a general term for a variety of elbows. They are used to connect pipe bends. They are used to connect two pipes of the same nominal size to make pipes turn at 90° or other angles.It is made of a variety of materials, alloy elbow is very versatile.
Common bronze alloy elbow in the general water pipeline is more common, but with the improvement of living standards, a lot of water pipeline to use stainless steel elbow.
The alloy elbow made of manganese steel is usually used in the pipe with severe wear consumption such as concrete conveying pipe and mud conveying pipe due to its excellent performance of bearing impact, extrusion and material wear, etc.But the high manganese steel alloy elbow is used in the pipeline with intense fluid flow and strong impact.Nickel-steel alloy elbows are usually used in high concentration oxidized acid (nitric acid, sulfuric acid) at room temperature, but in reducing acid (hydrochloric acid, dilute sulfuric acid, etc.) in the pipeline will be seriously corroded, unless the concentration of hydrochloric acid is very low;The elbows of Martensite alloy have high strength at high temperature, oxidation resistance and water corrosion resistance under 650℃, but the weldability is poor.Therefore, it is often used in high temperature water vapor transmission pipeline, water gas pipeline.Implementation standard: GB/T12459-2005, GB/T13401, GB/T10752-1999.
上一篇：没有了！
下一篇：没有了！
沧州奥广机械设备有限公司
地址:河北省沧州市
联系人：武先生
电话/微信: 15230713671
QQ: 540235112
邮箱: 15230713671@163.com
网站首页
电话咨询
联系我们
一键分享