Hebei pipe caps manufacturer

Hebei pipe cap manufacturer

The pipe cap is one of the indispensable pipe fittings in the pipe installation. The role played in the pipe is to block the end of the pipe, which is also the use of the pipe cap.The advantage of the pipe cap is that the end of the pipe block can be removed during use.The installation method of pipe cap is mainly direct welding or flange connection.

The forming process of pipe cap adopts advanced press and die one - time pressing.After the cap is pressed into shape, the staff of our company adopts various test procedures to carry out different forms of inspection.In addition, our company's staff according to the customer's requirements to carry out specific inspection.We have a quality inspection team for cap quality control.This test can install the model required by the customer and put the model and the same material together, so that the customer can easily find it in the process of using.This is something that we inspectors can quickly identify during the inspection.

After quality team inspection and advanced technology inspection, every customer to buy our company's cap products at a reasonable price can buy the company's high-quality cap products.The company in good faith and integrity to obtain customer recognition.

Specifications and wall thickness of pipe caps

In the production process, the cap should be produced according to the customer's customization and specifications, and the value in brackets should not be used as far as possible.The head of the tube cap is oval in shape.The length of the semi-ellipse part should not be less than 1/4 of the inner diameter of the pipe cap. When the nominal wall thickness of the pipe cap is less than and equal to the limit thickness, E value is adopted; when the nominal wall thickness of the pipe cap is greater than the limit thickness, E1 value is adopted.The outer diameter of the end of the pipe cap has two series AB, so A series should be preferred.

Pipe cap wall Thickness Grades and nominal wall thickness (from GB/T12459-1990)

209304