Simple introduction of alloy tube cap

Simple introduction of alloy tube cap  

Alloy pipe cap, also known as plug, cover, pipe cover, head, installed on the pipe end of the external thread to cover the pipe fitting.  Used to seal the pipe, the function is the same as the pipe plug, but the pipe cap can be directly screwed on the pipe, no other pipe fittings are required.  It is generally used for sampling port at the end of the pipe. After sampling is completed, it is necessary to screw the pipe cap. Secondly, in special circumstances, after screwing off the pipe cap, the wire mouth can be connected to the pipe, and temporary continuous feeding or pumping.  The tube cap is generally used in the case of low pressure, which is easy to disassemble and repair. In the case of high pressure, the tube cap is generally not needed.  The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.  

Alloy pipe cap is also called plug or head.  Use of pipe cap: pipe fittings welded to pipe end or mounted on pipe end external thread to cover and block pipe.  The cap is used to seal the pipe and acts as a plug.  The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.  Convex pipe cap includes: hemispherical pipe cap, oval pipe cap, disc pipe cap and dome pipe cap.  From the point of view of force, convex pipe cap is gradually bad from the hemispherical pipe cap, but from the point of view of manufacturing difficulty, gradually good manufacturing.  

The company in the production of the production of the main use of advanced methods to produce customized pipe cap products, who order our company production of pipe cap products, our company will provide a customer satisfaction recognized pipe cap products at a low price.