Describes the different places of the pipe cap and

Describes the different places of the pipe cap and head  

Our company briefly introduces the difference between pipe cap and head: When it comes to the head, we may think of a word, that is, pipe cap. What is the difference between the head and the pipe cap? Our company introduces the difference between the head and the pipe cap for users:  Head is a kind of size for boiler pressure parts, and major general in the ends of the pressure vessel can be used, and at the end of the pipe used so there are a lot of customers are called plug, which is on the tube plugging, there are a lot of use form, pipe cap, plug, LIDS, etc., also known as the head it is welded on the pipe end or installed outside the pipe thread to cover wall pipe fitting,  Used to seal pipes.  The head and the tube cap are very similar in shape, and some say that the head resembles a pan.  Pipe cap and head their difference is mainly in the inner diameter size, in the scope of application.  The head and the cap look similar, but the cap and the head are very different. The difference between the two mainly lies in the inner diameter and the range of use.  As mentioned before, the pipe cap is just the plug of the pipe. If it exceeds 300, it will be replaced by the head. The head is all with an inner diameter of 1 meter, which is worth it.  The above brief introduction of the different parts of the head and cap, the customer in order of pipe cap and cap hand to say clearly.  

• 上一篇：Simple introduction of alloy tube cap

• 下一篇：Cangzhou pipe cap manufacturers