Normal size standard for pipe caps

Normal size standard for pipe caps  

Customers at the time of order cap products, will be provided to the sales staff in our company different specifications and sizes and wall thickness of pipe cap making standard: pipe cap products offered by the company according to the customer on the material and manufacturing, pipe cap in the production of making main material press and die pressure molding, and the current production advanced technology and technological process for pipe cap.  

The material of the tube cap is mainly divided into carbon steel, alloy steel, stainless steel and so on.  

In the production process of pipe caps, the following points should be paid attention to: Do not use the values in parentheses as far as possible.  The head of the cap is oval in shape.  The length of the semi-ellipse should not be less than 1/4 of the inner diameter of the cap.  When the nominal wall thickness of the tube cap is less than or equal to the limit thickness, the value E is used.  When the nominal wall thickness of the tube cap is greater than the limit thickness, the E1 value is used.  There are two series of end outer diameter of pipe fittings, A series should be preferred.  

The use of the pipe cap: welded in the pipe end goods installed in the pipe end above the external thread to cover the pipe fittings, used to close the pipe, the role of the pipe block the same.  The blind plate is similar in form, except that the blind plate is removable and plugged, while the welded pipe cap is not removable.  

Classification of pipe caps:  

Convex pipe caps include: hemispherical pipe caps, oval pipe caps, disc pipe caps and dome pipe caps.  From the point of view of force, convex pipe cap is gradually bad from the hemispherical pipe cap, but from the point of view of manufacturing difficulty, gradually good manufacturing.  

The company has many years of experience in manufacturing, manufacturing and processing of customized pipe cap products using cash technology and equipment.