The processing technology of pipe cap manufacturer

The processing technology of pipe cap manufacturers is well received by customers  

Cap manufacturers to provide quality assurance, the use of a wide range of cap products, cap manufacturers using advanced technology processing forming.

Cap manufacturers to provide users with three guarantees: quality stability: the implementation of various departments and quality testing, all aspects of monitoring.

The price of the cap is reasonable: effectively reduce the cost control for the user, reduce the expenditure, let the customer benefit.

Delivery of pipe cap: in the contract signed by customers, we use advanced production lines to produce and process for customers and shorten the delivery period.

Cold stamping: under normal temperature in the press using stamping die to exert pressure on the sheet, so that its plastic deformation to obtain the required shape and size of the workpiece of a pressure processing method.  Cold stamping head size is accurate, good consistency, excellent surface quality, suitable for mass production, cold stamping process does not need fuel, save energy, reduce exhaust emissions, thereby reducing the impact on the environment, but also reduce the impact on the material itself.

Cold spinning: Sheet spinning forming process at room temperature.  By rotating the plate force point from point to line by line to surface, at the same time in a certain direction to give a certain pressure to make the metal material along this direction deformation and flow and molding.  Here, metal materials must have plastic deformation or flow performance, spinning is not equal to plastic deformation, it is a set of plastic deformation and flow deformation of the complex process, spinning technology is not a single spinning and ordinary spinning, it is the combination of the two.  For spinning products, except for flat heads, they are generally preformed by drum cold stamping before spinning.  Cold spinning method is suitable for non-standard diameter products, can save the cost of stamping die.

Hot stamping:  Thermoplastic hot stamping technology is to use the sheets are easy to shape, is suitable for the strength of high strength steel and thick head, due to adopt the way of heating processing, need to use fuel, has a great impact on the environment, because the sheet forming in heated state, performance is uneven, with embrittlement in stainless steel cooling process, need appropriate heat treatment after forming,  Restored or improved performance.  Due to the hot stamping, the expansion and contraction of the head is greatly affected by environmental factors, and the size control after the hot stamping is relatively difficult.

Hot spinning: plate spinning forming process under heat, currently less used in head processing, by heating the plate to the appropriate temperature, heating while spinning a forming process.  Hot spinning products are suitable for the manufacture of thick non-standard diameter products. Compared with hot stamping, it is easier to grasp the changing diameter.

Split processing: a drum forming process, generally using cold processing, according to the different materials also have heating mode.  The product range of split processing is generally beyond the exist