How to control the toughness of the cap

How to control the toughness of the cap

Pipe cap manufacturers briefly introduce the distinction between the toughness of pipe cap products: under normal circumstances, when we saw the drain pipe into a narrow strip, try to fold 180, if a fold will break, that the toughness is very poor, brittle; If it is very difficult to break, it shows toughness, and the more effort is needed to break the pipe when folding, the strength is very good, and toughness is generally good. Stubble can be observed (except saw stubble), the finer the stubble, the better the homogenization, strength and toughness of the pipe.

The blind plate is similar in form, except that the blind plate is removable plug, while the welded pipe cap is not removable. The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.

Convex pipe cap includes: hemispherical pipe cap, oval pipe cap, disc pipe cap and dome pipe cap. From the point of view of force, convex pipe cap is gradually bad from the hemispherical pipe cap, but from the point of view of manufacturing difficulty, gradually good manufacturing.

The material of the tube cap is stainless steel, alloy steel, carbon steel and so on.

Pipe cap production standards: Gb, German, Italian, American, Russian standard.

The wall thickness and diameter of the pipe cap are processed and formed according to the requirements of the customer.

Our company mainly engaged in the production of products: all kinds of stainless steel pipe fittings, elbow, flange, tee, tee, pipe cap, steel pipe and so on. Aoguang pipe fittings production company to new and old friends and customers to support the company, express heartfelt thanks, we wish long-term cooperation, common development.