Pipe cap manufacturer

Pipe cap manufacturer  

The company is the production of the strength of the pipe cap factory, free samples, size accurate, source manufacturer, pipe cap of low prices, quality assurance, service life is long, pipe cap in use process, corrosion resistance, high temperature resistant, can be made according to the customer's requirements, a variety of different specifications of the carbon steel pipe cap, carbon steel pipe cap manufacturers welcome your consultation!  

If the tube cap manufacturer requires that the forming thickness of the tube cap shall not be less than the nominal thickness δ N minus plate negative deviation C1, then the feeding thickness δ S =δ N +C1+C3+△2=8+0+1.5+0.5=10mm, and the small thickness after forming is 8.5mm.  If the tube cap forming thickness is not less than the design thickness δ D (the value of δ E should be taken), the feeding thickness: δ S =δ D (δ E) +C3+△2=8mm, and the small thickness after forming is 6.5mm, which is larger than the effective thickness δ E, larger than the design thickness δ D and the calculated thickness δ D.  Cap manufacturers can see from the above, the two different requirements, so that the cap feeding thickness of 2mm difference, and weight difference of 300kg.  The thickness definition of tube cap manufacturer GB150 and related tube cap standard is not reasonable, which is mainly reflected in the thickness requirement of container and tube cap after forming. The forming thickness requirement of convex tube cap and hot drum should not be less than the negative deviation of nominal thickness minus steel plate (δ N-C1).  

Our company mainly produces carbon steel pipe cap, elbow, tee, size head, flange and other pipe fittings.  All customers in our company to order pipe products our company will provide customers with excellent quality, low price, corrosion resistant pipe products.