Function of high pressure pipe cap

Function of high pressure pipe cap  

The company mainly produces a variety of different specifications of high-pressure pipe cap, all in the company to order high-pressure pipe cap products users, our company will provide customers with quality assurance products at a low price.  

High pressure pipe caps are generally used at the end of the pipe, and the head is used at the upper and lower (vertical) parts of the container equipment or the left and right ends (horizontal) pipe caps are generally of outer diameter size, such as 219,273,325 and so on.  Pipe cap, also known as plug, cap, pipe cap, head, installed on the pipe end of the external thread to cover the pipe fitting.  Used to seal the pipe, the function is the same as the pipe plug, but the pipe cap can be directly screwed on the pipe, no other pipe fittings are required.  It is generally used for sampling port at the end of the pipe. After sampling is completed, it is necessary to screw the pipe cap. Secondly, in special circumstances, after screwing off the pipe cap, the wire mouth can be connected to the pipe, and temporary continuous feeding or pumping.  The tube cap is generally used in the case of low pressure, which is easy to disassemble and repair. In the case of high pressure, the tube cap is generally not needed.  The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.  

The material of high pressure pipe cap is divided into carbon steel (A3, 20#, Q235, Q345B, 16Mn, etc.), stainless steel (304, 321, 304L, 316, 316L, etc.), alloy steel (15Mo3 15CrMoV 35CrMoV 45CrMo), aluminum, titanium, copper, nickel and nickel alloy, etc.  

 High pressure pipe cap manufacturers mainly according to your needs to order a variety of different models and materials of products, welcome the need of users to inquire about ordering!