Characteristics of pipe cap products

Characteristics of pipe cap products Pipe cap manufacturers have more than 10 years of production experience, the main production processing production of various specifications of pipe products, such as: pipe cap, elbow, tee, size head, flange and so on.  The material of the above pipe fittings products is mainly processed and formed according to the models ordered by customers. Welcome new and old customers to inquire!

Pipe cap manufacturers produce pipe cap including convex pipe cap, cone shell, reducer section, flat cover and tight mouth design.  Convex pipe cap includes: hemispherical pipe cap, oval pipe cap, disc pipe cap and dome pipe cap.  From the point of view of force, convex pipe cap is gradually bad from the hemispherical pipe cap, but from the point of view of manufacturing difficulty, gradually good manufacturing.

Cap manufacturers produce alloy cap and stainless steel elbow of different use value, in the user's impression and satisfaction will be different, so in the use of cap and stainless steel elbow should pay attention to its different performance and characteristics, for different environments and use scope.

Use of pipe cap: pipe fittings welded to pipe end or mounted on pipe end external thread to cover and block pipe.  Used to seal the pipeline, the function is the same as pipe blocking.

Pipe cap, also known as plug, cap, pipe cap, head, installed on the pipe end of the external thread to cover the pipe fitting.  Used to seal the pipe, the function is the same as the pipe plug, but the pipe cap can be directly screwed on the pipe, no other pipe fittings are required.  It is generally used for sampling port at the end of the pipe. After sampling is completed, it is necessary to screw the pipe cap. Secondly, in special circumstances, after screwing off the pipe cap, the wire mouth can be connected to the pipe, and temporary continuous feeding or pumping.  The tube cap is generally used in the case of low pressure, which is easy to disassemble and repair. In the case of high pressure, the tube cap is generally not needed.  The pipe cap includes convex pipe cap, cone shell, reducer section, flat cover and the design of tightening mouth.

The characteristics of the cap: corrosion resistance, stamping resistance, no scaling, long service life, heat preservation and energy saving advantages